# How to charge the Dyson Corrale

Source: https://plateandcurl.co.uk/blog/how-to-charge-dyson-corrale
Published: 2026-10-12
Publisher: Plate and Curl

**In short:** Connect the Corrale's magnetic charging cable to the charging point on the styler, or place it on its charging dock, and plug the cable into a wall socket. The display shows battery level while it charges. Dyson quotes up to about 30 minutes of cordless styling from a full charge and around 70 minutes to charge fully; check your manual for your model. You can also style with the cable attached, which is handy when the battery is low.

The Dyson Corrale is one of the few premium straighteners that works properly without a cable, using a lithium-ion battery in the handle. Getting the most from it means charging it the right way, understanding the display and knowing when to use it plugged in. This guide covers first charge, everyday charging, charge times, run time and the checks to make if it will not charge. Dyson changes accessories occasionally, so keep your manual handy for model specific details.

## What comes in the box

The Corrale charges through a magnetic connector. Depending on the bundle, you get a magnetic charging cable and often a charging dock that holds the straightener upright while it charges. The connector snaps onto the charging point on the styler, which stops it being pulled out by accident. Use the Dyson cable and power supply that came with it; generic chargers may not fit or may not supply the right power.

## Step by step: charging the Corrale

The first charge and every charge after follow the same steps.

1. Switch the Corrale off and let the plates cool if you have just used it.
2. Plug the charging cable into a wall socket.
3. Attach the magnetic connector to the charging point on the styler, or place the Corrale on its dock.
4. Check the display shows that it is charging.
5. Leave it until the display shows a full battery. Dyson quotes around 70 minutes from empty.
6. Unplug the cable from the socket when you finish if you are not leaving it on the dock.

## Run time, display and heat settings

Dyson quotes up to about 30 minutes of cordless styling from a full charge. Higher heat uses more energy, so expect less time on the hottest setting. The Corrale has three heat settings, widely listed as 165 °C, 185 °C and 210 °C, and the display shows the selected heat and remaining battery. The [temperature converter](https://plateandcurl.co.uk/tools/temperature-converter) helps if you are used to °F.

For a full style on long or thick hair, start with a full charge or keep the cable handy. For quick touch-ups, a partial charge is enough. Our explainer on [how cordless straighteners work](https://plateandcurl.co.uk/blog/how-do-cordless-straighteners-work) explains why battery run time is limited.

| Item | Typical figure |
| --- | --- |
| Cordless styling time | Up to about 30 minutes |
| Full charge | Around 70 minutes |
| Connector | Magnetic charging cable or dock |
| Heat settings | 165 °C, 185 °C, 210 °C |
| Use while plugged in | Yes |

Dyson Corrale charging at a glance (widely quoted Dyson figures, check your manual)

## Using it plugged in

When the battery is low, attach the magnetic cable and keep styling. This is useful on busy mornings or when travelling where you can reach a socket. The magnetic connection can detach if the cable is pulled hard, which is a safety feature; reattach it and continue.

To look after the battery, avoid storing it completely flat for long periods and keep it away from heat sources such as radiators or sunny window sills. Charge it in a cool, dry room.

Note: The Corrale contains a lithium-ion battery. Do not charge it with a damaged cable or connector, keep it away from water, and follow airline rules when flying: carry it in hand luggage and check the airline's current guidance.

## If the Corrale will not charge

First check the basics: a working wall socket, the cable firmly attached and the magnetic contacts clean. Hair, dust or product on the contacts can stop a good connection; wipe them gently with a dry cloth while unplugged. Try the cable without the dock, or the dock without the cable, to see which part is at fault.

If it charges but runs flat quickly, the battery may be wearing out. Our guide to the [Dyson Corrale not holding charge](https://plateandcurl.co.uk/blog/dyson-corrale-not-holding-charge) covers resets and battery replacement, and Dyson support can advise on repairs. If you are weighing up cordless options, see our [best straighteners for travel](https://plateandcurl.co.uk/best/best-straighteners-for-travel) and the [Dyson Corrale vs ghd](https://plateandcurl.co.uk/blog/dyson-corrale-vs-ghd) comparison.

[See the best straighteners for travel](https://plateandcurl.co.uk/best/best-straighteners-for-travel)

## Frequently asked questions

**How long does the Dyson Corrale take to charge?** Dyson quotes around 70 minutes for a full charge. Check your manual for your model.

**How long should I charge the Dyson Corrale the first time?** Charge it fully before first use, until the display shows a full battery.

**Can you use the Dyson Corrale while it is charging?** Yes. Attach the magnetic cable and use it corded.

**Why is my Corrale charger not working?** Check the socket, clean the magnetic contacts and try the cable and dock separately. Contact Dyson if neither works.

## Buying guides on this topic

- https://plateandcurl.co.uk/best/best-straighteners-for-travel
- https://plateandcurl.co.uk/best/best-hair-straighteners

## Sources

- [Dyson UK support](https://www.dyson.co.uk/support)